Figure 22.—Turning the finishing edge in plaiting. a, commencement of turn: 1, foundation strip; 2, a sinistral weft introduced along working edge of last section; 3, uppermost dextral weft of working section; 4, upper element of (3) dextral weft; 5, lower element of (3) dextral weft, passed under (1) foundation strip, along finishing strip, along finishing edge, and turned at right angles to cross (1) foundation strip and (7) second dextral weft, and to lie over (2) introduced sinistral weft. b, completing turn: 4, upper element of (3) uppermost dextral weft of working section is carried across (1) foundation strip, turned down at right angles, passed under foundation strip and over lower element of (7) next dextral weft to the right, and laid under (5) now become the upper element on sinistral weft; the plaiting is continued and part of (3) weft overlying (2) sinistral weft is incorporated with it; 2, 6, 8, 10, ends of sinistral wefts, are torn off at finishing edge when plaiting is completed; 7, 9, 11, 13, 15, 17, dextral wefts, are turned at finishing edge and incorporated in plaiting as part of sinistral wefts in last working section; ends of these dextral wefts, after they have been turned as weft 3, are torn off under cross wefts, when plaiting is completed.