On a recent visit to the Southern Pacific Railway Company's Locomotive Workshops at Sacramento, California, I was very cordially received and had the greatest consideration shown to me by all the officials, from the Super-intendent downwards.

All the information and papers were placed at my disposal. This appears to be the usual practice in the States, any information held by one firm or institution being freely available to others—a liberal attitude which is responsible to some extent for the present prosperity of the country. By passing on, for the benefit of others, anything good an increased output at a lesser expense has been made possible.

In 1829 a crude little locomotive in England successfully hauled a railroad passenger train. It was Stephenson's locomotive, the “Rocket,” and it was considered a marvel, because it could jolt along with two loaded coaches weighing about 10 tons. How the locomotive has since developed, with almost equal rapidity in all countries (including our own young Dominion) is a leading feature in the history of the most progressive of all centuries.

The first locomotive to run in the West was the “Governor Standford” which was brought round from New York via Cape Horn in October, 1863. It was christened “Governor Standford” after the then Governor of California, who with Messrs. C. P. Huntingdon, C. Crocker and M. Hopkins was responsible for the daring plan to build a railroad over the Sierra Nevada Mountains to the East.

The Railway Companies of U.S.A. have a happy plan of giving romance to railway working by naming not only their trains (e.g., the “Sunset Limited”), but also their locomotives and Pulman carriages.

This plan has been followed up to a point with good effect in New Zealand. For instance, the locomotive “Passehendaele,” the South Island “All Red” Express and the Northern “Daylight Limited” are titles which have become popular with the public. An extension of the principle to all Express trains and locomotives would meet with general approval from the public who in this country actually have a proprietary interest in them.

The “Governor Standford” may now be seen in the Museum at Standford University, Calffornia, while our own pioneer “Josephine” will find a resting place in the Otago Early Settlers' Museum.

The next Californian locomotive placed in service was the “C. P. Huntingdon” in 1864. It was 291/2 feet in length, weighed 171/4 tons, and could haul 4 cars weighing 22 tons each at 35 miles per hour up a grade of 26 feet to the mile. It is still in serviceable condition, but is used only for exhibition purposes.

A short time later the first typically freight locomotive was placed on the road. It had six driving wheels and was considered a wonder because it could haul eighteen small goods ears. This freight engine was named the “Conness” after a Californian Senator.

The early locomotives were picturesque in appearance. They had the old fashioned furnace, brass fittings and gay paint.

Wood was the fuel for the first locomotives, and firemen in those days had a heavy job.

The first transcontinental railway in the United States was completed on May 10th, 1869, the famous “Golden Spike” in commemoration being driven at Promontory, Utah, on that date.

Settlement followed the railroad, and the “Prairie Schooner” was replaced by “Goods freight trains,” which, even in the home of the automobile industry, cannot be displaced by motors. More powerful locomotives were required so that a larger train unit could be handled, at the same time freight or goods cars increased in weight. At present a goods car with load, weighs 50 tons.

One of the most interesting of the early locomotives built in Sacramento Shops was “El Gobernador” which was in actual service from 1884 to 1893. This locomotive was then said to be the heaviest and most powerful locomotive in the world. When loaded it weighed 105 tons. Tourists were amazed at the size of the “El page 43 Gobernador.” It was considered too big to be turned on a turntable for fear it would tip over, and was kept on the main line, all trains having to take sidings when meeting the big engine so that there would be no danger of its leaving the rails.

By 1894 thirty-ton freight cars were being used. Locomotives, too, were heavier and had more than twice the power of the earlier ones. The “4–6–0” type of passenger locomotive and the “4–8–0” type of freight service were the pride of the rails at this time. Freight engines of the “4–8–0” type of 1894 were 60 ft. 9 in. in length, weighed 121 1/2 tons and could haul 65 cars weighing 30 tons each (total 1,950 tons) at a speed of 10 miles an hour, up a grade of 26 feet to the mile. But to keep up with the transportation demands greater motive power was required.

The most powerful and economical non-articulated (single engine unit) locomotive yet designed, was placed in service in 1925 to handle heavy trains over mountain sections of the West. It is known as the “Southern Pacific” type or “4–10–2.” This locomotive combines all the latest developments, having for their purpose the increase of hauling capacity, commensurate with increased economy. It has a third cylinder placed inside the main frames slightly above and between the two outside cylinders. The locomotive is 101 feet 1 inch in length over all and weighs 305 tons.

At a speed of 25 miles an hour, up a grade of 116 feet a mile, the new locomotive has 25 percent, more hauling capacity than that of any previous locomotive built for the Southern Pacific Company.

The most powerful locomotives in passenger service, prior to the advent of the Southern Pacific type three cylinder locomotives, are known as the “4–8–2” or mountain type. They are 97 feet 6 inches in length, weigh 272 1/2 tons, and are twenty times more powerful than the “C. P. Huntingdon.” Each can pull 14 passenger cars weighing 70 tons each (total 980 tons) at 50 miles an hour, up a grade of 26 feet to the mile.

A new record for a regularly maintained locomotive run was established by the “8–4–2” engines. The run between Los Angeles and El Paso, 815 miles, is made without change of locomotives. Previously a relay of four locomotives had been considered necessary in speeding trans-continental passenger trains across the mountain and desert country between the two cities. A companion type to the “4–8–2” passenger, is the “2–10–2” freight locomotives, length 97 feet 9 inches, weight 278 tons. They can haul 96 freight cars, weighing 50 tons each, total 4,800 tons, at a speed of 10 miles an hour up a grade of 26 feet to the mile.

All the latest type of locomotives are equipped with auxiliary booster engines, superheaters, feed waterheaters, sprinklers, and other devices for increasing economy and power.

The Booster engine is a separate two cylinder steam engine geared to the axle of the trailing page 44 bogie wheels. It assists the main engine in handling trains, eliminating the use of banking engines, gets up speed at starting, makes up time on grades and automatically shuts off when a speed of 15 miles is reached.

The feed water heater performs the double operation of pumping water from the tender to the boiler, and heating it on the way. It utilises exhaust steam from the main cylinders to heat the water. Part of this steam is condensed and returned to the boiler for use again, thus reducing sediment and economising water.